Skip to content
AXXA

Capability 01

Embedded Software Engineering

Software that runs close to the hardware, built to outlive the first release.

01Introduction

Overview

Embedded products live for ten years or more. The software on them must survive new silicon, new regulations, new features and engineers who were not there when it was written.

We design and build embedded software with that lifetime in mind: clear separation between hardware-specific and application code, explicit resource budgets, and tests that run long before a board is on the desk. We work inside your code base and your process, and leave behind software your team can own.

02Engineering challenges

The problems we are typically asked to solve.

  1. 01

    Platform code that resists change

    Board support, drivers and application logic grow together until a new SoC, sensor or RTOS release means touching everything. Porting becomes a project instead of a task.

  2. 02

    Timing and resource budgets that are implicit

    Memory, CPU load and latency limits live in engineers' heads rather than in the design. Problems surface late, under load, on the target.

  3. 03

    Embedded Linux images nobody can rebuild

    Yocto layers, vendor BSPs and local patches accumulate without a reproducible build. Security updates and long-term maintenance become risky.

  4. 04

    Testing that only happens on hardware

    When logic cannot run off-target, every change waits for a bench, a board and a person. Feedback cycles stretch from minutes to days.

03Scope

What an engagement can cover.

  • Firmware and application software in modern C and C++ (C11/C17, C++17/20)
  • Embedded Linux platforms, Yocto Project layers, BSP integration and image configuration
  • RTOS-based designs: task structure, scheduling, inter-task communication and timing analysis
  • Hardware abstraction layers that isolate application logic from silicon and boards
  • Device drivers, peripheral integration and bring-up support
  • Platform security: secure boot, signed updates and hardening of Embedded Linux and Yocto images
  • Memory, power and performance budgeting for resource-constrained targets
  • Refactoring and modernisation of existing embedded code bases

04Technical expertise

Technologies and methods in practice.

Languages & runtimes
  • C
  • Modern C++
  • Rust
  • Python
Operating systems
  • Embedded Linux
  • Yocto Project
  • QNX
  • FreeRTOS
  • Zephyr
  • NuttX
  • Bare-metal
Platform
  • Hardware abstraction layers
  • Linux device drivers
  • Bootloaders
  • User-space applications
Constraints
  • Real-time behaviour
  • Deterministic memory use
  • Power-aware design
  • Footprint optimisation

05Deliverables

What you receive.

  1. D01

    Production embedded software

    Reviewed, tested source code integrated into your repository and build, with the design decisions behind it written down.

  2. D02

    Platform and BSP layer

    Reproducible Yocto layers or RTOS configuration, a documented hardware abstraction and a clear porting boundary.

  3. D03

    Resource and timing budget

    Explicit memory, CPU and latency budgets per component, with measurements on target to confirm them.

  4. D04

    Off-target test harness

    Host-built unit and component tests for hardware-independent logic, runnable in CI on every change.

06Related capabilities

Contact

Discuss embedded software for your system.

Describe the system and the challenge. We will tell you honestly whether and how we can help.

Start a conversation